UK Cold Casting Repair Division Gains Bureau Veritas Approval

The Metalock Engineering UK Ltd Cold Casting Repair Division, Coventry, have gained Bureau Veritas Approval.

Bureau Veritas Approval

JP/18/MET/METALOCKA/1
Joining Procedure Approval Test Certificate A

The joining process has been developed and used for the repair of Cast Iron products for both structural and pressure containing components. The process does not create fusion within the metal joining line and therefore not deemed a welding process.

The testing performed, witnessed and certificate issued, is in the absence of any current and valid BS EN ISO published standard.

The joining process does not meet the requirement of a harmonised standard as issued under OJ2018/C 049/0. The permanent joining procedures has been assessed in compliance with PED category SEP, I, II, III & IV Pressure Equipment with limitations to be assessed by Metalock Engineering UK, Unit H5, Pilgrims Walk, Prologis Park, Coventry. CV6 4QG

Certify that test joints were prepared, joint processed and tested satisfactory in accordance with the requirements of the Manufacturers standard